| Product
Overview |
Koster
ORS - Oil Removal System  |
An oil-removal and containment
treatment process to rehabilitate
concrete surfaces making
them suitable to receive
any type of flooring system.The
Koster Oil Removal System
comprises of ORS D which
is a specially designed
chemical based detergent
application which penetrates
deep into the concrete
to remove the contaminants,
and the ORS C which is
a high specific gravity
based oil resistant epoxy
base coat. These provide
a combination of removal
of the contaminants from
deep into the surface
and then providing a barrier
for up / down movement
of the contaminants. |
| Koster
Joint Tape System |
| A complete and comprehensive solution for the treatment of horizontal & vertical expansion joints with the combination of 2 products - KOSTER Joint Tape and KOSTER KB-Pox® Adhesive. |
| Koster
Deuxan 2C Extratight Tropic |
| Crack-bridging, Seamless, 2 component, polymer modified bitumen thick film sealant for positive side waterproofing of basements, terraces and open spaces. |
| Koster
Repair Mortar |
| A Fillet, repair mortar and repair plaster |
| Koster
PSM |
| A 3-component high chemically resistant mortar on polymer and silicate-base with very high resistance to acids. The fully cured mortar possesses a very high compressive strength and is abrasion resistant. |
| Koster
KBE Liquid Film "T" |
| A Highly elastic, solvent-free, rubber/bitumen liquid membrane used for foundation and intermediate waterproofing on horizontal areas of terraces, balconies, wet and moist rooms (under screeds), as well as for sealing seams and edges of waterproofing membranes in above and below ground construction, e. g. underground garages. |
| Koster
Flex Tape K 120 |
| A highly flexible, rubber-like joint sealing tape made from high quality elastomer, used to connect area waterproofings in zones which are in danger of cracking. |
| Koster
NB Powder |
| This is a cement based
crystalline brush on waterproofing
system having usuage in
almost all waterproofing
solutions. Its elasticity
range of 15 %, pH of 11.5
and self curing properties
make it a unique and path
breaking system |
| Koster
SB Bonding Liquid |
This is a high quality
carboxylated SBR based emulsion.
It has been specially designed
for use with the Koster
NB Powder to compliment
and enhance the characteristics
of this system. It can also
be used in plasters and
repair mortars
|
| Koster
NB Elastic system |
This is a two component
acrylic based brush on application
which is highly elastic
- 85 % and also UV resistant.
It has been widely used
in conjuntion with the Koster
NB system.
|
| Koster
Dachflex |
| This is a solvent free
waterproofing systemexclusively
designed for sealing of
external and internal cracks
in walls / plaster. Its
high elasticity - 300 %,
UV resistance, self curing
and ease of application
makes this a high demand
product for the Indian market |
| Koster
Crisin 76 |
| This is a resin based
low specific gravity liquid
which when injected into
walls offers a total solution
for rising dampness from
ground water, etc. Its unique
formulation makes it highly
effective in both acidic
and alkaline conditions.
It can also be used in wet
conditions. |
| Koster
KD System |
| This is a three component
system which offers solutions
to active and also aggressive
leakages. Its extremely
fast setting time - 20 secs
- makes it effective in
solving almost all leakages
coming from RCC and / or
brick masonry structures |
| Koster
Polysil |
| This is a low viscous,
silicate based colourless
brush on polymer extensivley
used in arresting problems
of efflorescenses due to
the alt contaminated substratest.
Its properties of impregnation
upto 2 cms make it a useful
product in a diverse range
of application. |
| Koster
Silicate Mortar |
| This is a two component
acid resistant mortar which
when applied ahcieves a
seemless layer which can
withstand acid attack up
to a pH of 1. This makes
it a excellent acid resistant
liner for acid tanks etc |
| Koster
KB Flex 200 |
| This is a single component,
permanently malleable mastic
product used the sealing
of actively leaking cable
sleeves in the basement.
This is a unique product
that offers a complete solution
to this problem |
| Koster
Waterstop |
| This is a single component
system which offers solutions
to active leakages. Its
fast setting time - 1 -
2 minutes - makes it effective
in solving almost all leakages
coming from RCC substrates |
| Koster
CFR 1 |
| This is a
highly flexible hot bonding
mass based on rubber and
bitumen. It is easy to apply
and quick solution for waterproofing
of podium slabs and garden
areas. It provides excellent
adhesion to virtually any
dry mineral and bituminous
substrate. Once CFR1 has
been applied to the substrate,
it accommodates cracks &
joints flawlessly. |
| Koster
Betomor Multi A |
| Easy to use,
factory packed, self curing,
achieves high compressive
strength (> 3 N / mm2
in 4 hrs.) and can be painted
over, 24 hrs. after application
– this is Koster Betomor
Multi A a polymer modified
multi purpose mortar for
concrete and brick surfaces
which can be easily applied
on horizontal, vertical,
and over head surfaces in
a single layer and up to
a thickness of 60 mm. |
| Koster
KB Pur In 1and KB Pur In
2 |
| KB PUR IN
1 along with KB PUR IN 2
or KB PUR IN 2 on its own
can be used for stopping
pressurised water in cracks
and joints. KB PUR IN®
1 is a 2 component water
activated PU-Injection Foam.
The KB-PUR® IN 2 is
a solvent and filler free,
low viscosity, 2 component,
elastic polyurethane-injection
resin for sealing of live
(moving) cracks. |
| Koster
KB Pur 2 in 1 |
| This is a
water activated PU - Injection
resin for a one-step injection
of water bearing cracks
and joints. |
| Koster
KB Pur Gel |
| This is a
unique hygorscopic product
with an extremely fast setting
time - 20secs - when in
contact with water. Its
high elasticity makes it
ideal for sealing of actively
leaking horizontal expansion
joints in water retaining
structures. |
| |
|
